1. The rotating stator of the chemical machine is generally made of high-strength cemented carbide, which is similar to the shear movement of two grinding discs. It is more wear-resistant, and the chemical effect can be achieved by adjusting the gap.

The advantages are good mixing effect, suitable chemical head can be applied to a variety of working conditions, widely used and suitable for a variety of different industries;

The disadvantages are low output and poor mixing effect for hard granular materials and high viscosity materials.

2. High pressure homogenizer: it is mainly used to mix two liquid substances with good effect, and it is not suitable for mixing solid and liquid substances. Because most homogenizers are plunger type, solid particles

The plunger will be worn, and the particles will be stuck at the check valve, reducing the homogenization effect.

The advantages are good mixing effect;

The disadvantages are high power consumption, low output, easy failure and high maintenance cost.

3. The high-speed mixer is mainly used for simple mixing. For example, there is no need to refine the particles of the material itself, just simple mixing;

The advantages are that the traditional mixing method has large output and wide application;

The disadvantage is that there is no shear thinning effect on materials, and only simple mixing can be carried out